IPP3SAD2L0G
Illuminated or non-illuminated momentary action pushbuttons for harsh environments, sealed to IP67.
Specifications
Distinctive Features:
- Illuminated or non-illuminated
- Tactile feedback
- Wide variety of configurations
- Flat round actuator for optional marking
- Sealed to IP67 and IP69K
General Specifications:
- Panel thickness: 1.5 mm (.059) min. , 4 mm (.157 max.)
- Total travel: Function 3: 1.7 mm (.067) +/- 0.3 mm Function 5: 1.3 mm (.051) +/- 0.3 mm
- Typical operating force : 6N +/- 2N
- Low level/mechanical life: 1,000,000 cycles
- Torque: 1.5 Nm max. applied to nut
- Soldering: 320°C max. for 3 sec.
Environmental Specifications:
- Front panel sealing: IP67 according to IEC 60529, IP69K according to DIN 40050-9 (non-illuminated) with cap U5125
- Shock resistance: 100 g according to IEC 512-4, test 6c
- Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
- Salt spray: IEC 512-6, test 11f
- Robustness (non-illuminated): IK06 according to EN 50102 (1 joule)
- Operating temperature: -40°C to +85°C (-40°F to 185°F)
Electrical Specifications:
- Max. current/voltage rating with resistive load (gold plated silver contacts): 5A 28VDC, 70,000 cycles 0.2A 48VDC, 500,000 cycles 0.5A 48VAC, 500,000 cycles
- Initial contact resistance: 100 mΩ max.
- Insulation resistance: 1 GΩ min. at 500VDC
- Dielectric strength: 1,500 Vrms
- Contact bounce: 10 ms
Materials:
- Case : thermoplastic, UL 94-V0
- Actuator : polyamide 6/6
- Bushing/bezel : zinc die-cast (zamak), black painted
- Contacts : silver, gold plated
- Output wires (flying lead terminals) :
- F version : AWG20, section 0.6 mm2
- LED wires :
- F version : AWG26, section 0.12 mm2
- Lens : polycarbonate
- Terminal seal : epoxy
Added to Your Cart