FPBR1C1462E1113
FP 26 mm series illuminated pushbutton switches feature a dia. 26 mm bushing and snap-in mounting.
Wesentliche Merkmale
- Serie: FP
- Modell: Einrasten, Ø 26 (1.023)
- Markierung: Weißer Tampondruck
- Symbole: Gefahrenhinweis (0085)
- Aktuatoren: Rund, gebogen
- Terminals: Lötfahnen
- LED-Farbe: Weiß
- Lünettenfarben: Schwarz
- Contact Mat: Silber, vergoldet
- Geführte Widerstände: 12-VDC-Widerstand
- Betätigerfarben: Rot
- Elektrische Funktionen: OFF - ON
- LED-Steuerung und Anzahl der Pole: Unabhängig, 1-polig
Spezifikationen
Unterscheidungsmerkmale:
- Snap-in mounting
- Full actuator or symbol illumination
- Large but lightweight
- Pad printed or laser etched symbols
Allgemeine Spezifikation:
- Panel thickness : 1,5 (.059) to 2 mm (.078) with panel gasket, 2 (.078) to 2.5 mm (.885) without panel gasket
- Total travel : 2.5 mm ± 0.5 mm
- Typical operating force : 8 N ± 2 N
- Low level or mechanical life : - Momentary models : 1 million cycles - Latching models : 200,000 cycles
Umgebungsbedingungen:
- Front panel sealing : IP54 according to IEC 60529 with panel gasket and 2 mm panel thickness
- Operating temperature : -40 °C to +75 °C
Elektronische Spezifikationen:
- Max. current/voltage rating with resistive load : - silver contacts (code 2) : 4 A 12 VDC - gold plated contacts (code 4) : 200 mA 12 VDC
- Initial contact resistance : 50 mΩ max.
- Insulation resistance : 1 GΩ min. at 500 VDC
- Dielectric strength : 1,000 Vrms 50 Hz min.
- Electrical life at full load : - Momentary models : 1 million cycles (gold plated contacts), 400,000 cycles (silver contacts) - Latching models : 200,000 cycles
Materialien:
- Case : PA46
- Actuator : PA12
- Bushing/ bezel : ABS
- Contacts : silver (code 2) or silver, gold plated (code 4)
Added to Your Cart