AV09103EA810
The AV09103EA810 Panel Switch is an essential component in any electronic system. With its quickconnect terminals, installation is a breeze. The switch is built to last, with a bushing and actuator made from durable nickel plated brass and stainless steel materials. Whether you need to control lights, power, or other functions, this pushbutton switch is the perfect choice.
Key Features
- Electrical Functions: ON ON
- Bushing Actuator Materials: Nickel-Plated Brass & Stainless Steel
- Contact Materials: Silver
- Illumination: No.
- Sealing: Unsealed
- Terminals: Quick Connect
Specifications
General Specifications:
- Torque : 1.5 Nm min.- 4 Nm max. applied to nut
- Panel thickness : 1 (.039) to 9 mm (.354) max.
- Low level or mechanical life : 1,000,000 cycle
- Hand soldering : 300 °C, 4 seconds max.
- Panel cut-out : Ø 19,2 mm (.755) or Ø 22,2 mm (.874)
- Min. pitch for matrix mounting : 30 mm x 30 mm (1.181 x 1.181)
Environmental Specifications:
- Optional front panel sealing : IP65
- Operating temperature : -30 °C to +70 °C (-22 °F to +158 °F)
Electrical Specifications:
- Max. current/voltage rating with resistive load : 2A 48 VDC
- LED voltage and consumption : blue 3.2 V 20 mA, green : 2.1 V 20 mAyellow : 2 V 20 mA, red : 1.95 V 20 mA (a resistor must be series-connected by the user)
- Initial contact resistance : 50 mΩ max.
- Insulation resistance : 1,000 MΩ min. at 500 VDC
- Dielectric strength : 1,000 Vrms 50 Hz min. between terminals500 Vrms 50 Hz min. between terminals and frame
- Electrical life : 500,000 cycles at 2 A 48 VDC
Added to Your Cart