5646CDKB
The 5646CDKB Panel Switch is an essential component for any electrical system. With its double pole design, it offers reliable performance and versatility. Whether you need to control lights, motors, or other electrical devices, this switch has got you covered. Its electrical functions are set to ON ON, ensuring seamless operation. With options for solder lugs or straight PC mounting, you can easily integrate this panel switch into your setup. Trust the 5646CDKB to provide the functionality and convenience you need.
Key Features
- Number Of Poles: Double Pole
- Electrical Functions: ON ON
- Mounting: Solder Lug or Straight PC
- Contact Materials: Brass (Gold-Plated)
- Finish: Nickel-Plated
- Sealing: Combined Sealings
- Terminals And Bushing: Solder Lug Terminals
Specifications
Distinctive Features:
- Bushing Ø 11.9 (15/32)
- Panel mounting and PCB terminal combination available
- 1 to 4 pole configurations
- UL and CSA approved
General Specifications:
- Torque : 1,25 Nm (.922 Ft.lb) max. applied to nut
- Panel thickness : 2,5 mm (.098) with 2 nuts - 4 mm (.157) with 1 nut
- Low level or mechanical life : 100.000 cycles
Environmental Specifications:
- Operating temperature : -40°C to +85°C
Electrical Specifications:
- For inductive, lamp or capacitive load, consult factory.
- Initial contact resistance : 10 mΩ max.
- Insulation resistance : 1.000 MΩ min. at 500VDC
- Dielectric strength :1.000 Vrms 50 Hz min. between terminals1.500 Vrms 50 Hz min. between poles1.500 Vrms 50 Hz min. between terminals and frame
- Contact bounce : 2 ms max.
- Electrical life at full load :50.000 cycles for single and double pole 40.000 cycles for 3 pole30.000 cycles for 4 pole
Added to Your Cart