HF11S10
The HF11S10 Joystick, with its sleek and ergonomic design, is the ultimate companion for precise control. The Tapered 2 axis Handle allows for seamless movement in all directions, ensuring smooth and accurate navigation. With the Square Limiter, you can easily set boundaries to prevent overextension. The convenient Drop in Mounting makes installation a breeze. Plus, the Output Options of 0V and 5V provide versatility to suit your specific needs. Upgrade your control experience with the HF11S10 Joystick.
Key Features
- Output Options: 0V to 5V
- Limiter: Square
- Handle: Tapered 2-Axis
- Mounting: Drop-in
Specifications
Distinctive Features:
- One, two or three axis
- Analog outputs
- CAN bus J1939 and CANopen options
- USB 2.0 HID interface options
- Connectorized housing
General Specifications:
- Break Out Force: 1.3N (0.3lbf)
- Operating Force: 2.8N (0.63lbf)
- Maximum Applied Force: 200N (45.00lbf)
- Mechanical Angle of Movement: 36º (18º from center)
- Expected Life: 5 million
- Package Size: 5.75” x 4.50” x 3.25”
- Lever Action: Single spring, omnidirectional
Environmental Specifications:
- Operating Temperature: -40ºC to 85ºC (-40ºF to 185ºF)
- Storage Temperature: -40ºC to 85ºC (-40ºF to 185ºF)
- Sealing (IP): Up to IP68*
- EMC Immunity Level (V/M): EN61000-4-3
- EMC Emissions Level: EN61000-6-3:2001
- ESD: EN61000-4-2
- Output linearity: ±200mV
- Dual output interlinearity (X/Y): ±400mV
- Dual output interlinearity (Z): ±600mV
Electrical Specifications:
- Sensor: Hall effect, single or dual
- Supply Voltage Range: 5VDC±0.01VDC
- Supply Current: 40mA typical / 50mA max (3 axis)
- Reverse Polarity Max: -10VDC
- Transient Overvoltage Max: 16VDC
- Ratiometric Output Voltage: See options
- Output Current: 8mA
- Output Load: 1K ohm min
- Output Impedance: 2Ω
Added to Your Cart