IPP3SAD2L0G
Illuminated or non-illuminated momentary action pushbuttons for harsh environments, sealed to IP67.
Specifications
Distinctive Features:
- Illuminated or non-illuminated
- Tactile feedback
- Wide variety of configurations
- Flat round actuator for optional marking
- Sealed to IP67 and IP69K
General Specifications:
- Panel thickness : 1,5 mm (.059) min. , 4 mm (.157 max.)
- Total travel : Funct. 3 : 1,7 mm (.067) +/- 0,3 mm Funct. 5 : 1,3 mm (.051) +/- 0,3 mm
- Typical operating force : 6N +/- 2N
- Low level/mech. life : 1.000.000 cycles
- Torque : 1,5 Nm max. applied to nut
- Soldering : 320°C max. for 3 sec.
Environmental Specifications:
- Front panel sealing : IP67 according to IEC 60529, IP69K according to DIN 40050-9 (non-illuminated) with cap U5125
- Shock resistance : 100 g according to IEC 512-4, test 6c
- Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
- Salt spray : IEC 512-6, test 11f
- Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule)
- Operating temperature : -40°C to +85°C
Electrical Specifications:
- Max. current/voltage rating with resistive load (gold plated silver contacts): 5A 28VDC, 70.000 cycles 0,2A 48VDC, 500.000 cycles 0,5A 48VAC, 500.000 cycles
- Initial contact resistance : 100 mΩ max.
- Insulation resistance : 1 GΩ min. at 500VDC
- Dielectric strength : 1.500 Vrms
- Contact bounce : 10 ms
Materials:
- Case : thermoplastic UL94-V0
- Actuator : polyamide 6/6
- Bushing/bezel : zinc die-cast (zamak), black painted
- Contacts : silver, gold plated (std) brass, gold plated (for option 104)
- Output wires (flying lead terminals) : F version : AWG20, section 0,6 mm2 W version : AWG24, section 0,23 mm2
- LED wires : F version : AWG26, section 0,12 mm2 W version : AWG24, section 0,23 mm2
- Lens : polycarbonate
- Terminal seal : epoxy
Added to Your Cart