SY236CD-7
The SY236CD-7 Panel Switch, with Part Number SY236CD-7, is designed for bracket mounting. It features a single pole for seamless electrical functions. With its ON ON functionality, this switch provides a reliable and efficient solution. The SY236CD-7 is equipped with short standard levers, ensuring easy and comfortable operation.
Key Features
- Number Of Poles: Single Pole
- Electrical Functions: ON ON
- Contact Materials: Brass (Gold-Plated)
- Levers: Short Standard
- Terminal Spacing: 4.7mm (0.185) or 3.81mm (0.150)
- Terminals: Bracket Mounting
Specifications
Distinctive Features:
- Process sealed
- Front and rear sealing
- Process compatible
- Wave solderable
- Washable
General Specifications:
- Mechanical strength : Terminals are strengthened by a bracket or a ground plate ensuring the rigidity of the switch on the board. Actuator strength is 10N max.
- Soldering - thermal shock (S series only) : The switches are especially designed for flow soldering at 260°C during 5 seconds owing to high temperature polymer parts.
- Iron soldering (SF series) : 300°C 5 sec. max.
- Solderability : The switches are tested at 235°C according to IEC 68-2-20 after accelerated aging.
Environmental Specifications:
- Operating temperature : -20°C to +85°C
- Storage temperature : -40°C to +85°C
- Moisture : The insulating materials employed and the complete seal permit the switches to withstand a 56 days moisture test (IEC 68-2-3).
Electrical Specifications:
- Max. current/voltage rating with resistive load :- silver contacts (A or 1) : 4A 30VDC- gold plated brass contacts (CD or 0) : 0,4VA 20VAC or DC- gold plated silver contacts (AD or 2) : 4A 30VDC (300mA 30VDC for gold plating)
- Initial contact resistance : 10 mΩ max.
- Insulation resistance : 1.000 MΩ min.
- Dielectric strength : 1.000 Vrms 50 Hz min.
Added to Your Cart