IPC3FAD2L0S
Illumination,
Wesentliche Merkmale
- Betätigerfarben: Schwarz
- Elektrische Funktionen: Normally open (NO)
- Montage: Fliegende Leitungen, Standard
- Kontaktmaterialien: Silber, vergoldet
Spezifikationen
Unterscheidungsmerkmale:
- Illuminated or non-illuminated
- Tactile feedback
- Wide variety of configurations
- Flat round actuator for optional marking
- Sealed to IP67 and IP69K
Allgemeine Spezifikation:
- Panel thickness : 1,5 mm (.059) min. 5,5 mm (.217) max.
- Total travel : 2,5 mm (.098) +/- 0,3 mm
- Typical operating force : 10 N
- Low level/mech. life : 200.000 cycles
- Torque : 1,5 Nm max. applied to nut
- Soldering : 320°C max. for 3 sec.
Umgebungsbedingungen:
- Front panel sealing : IP67 according to IEC 60529
- Shock resistance : 100 g according to IEC 512-4, test 6c
- Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
- Salt spray : IEC 512-6, test 11f
- Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule)
- Operating temperature : -40°C to +85°C
Elektronische Spezifikationen:
- Max. current/voltage rating with resistive load :4A 12VDC, 200.000 cycles1A 48VDC, 200.000 cycles2A 48VDC, 100.000 cycles3A 48VDC, 75.000 cycles1A 72VDC, 15.000 cycles
- Initial contact resistance : 100 mΩ max.
- Insulation resistance : 1 GΩ min. at 500VDC
- Dielectric strength : 1.500 Vrms between terminals - 1.000 Vrms between terminals and frame
Added to Your Cart