AV191003C940T
Introducing the AV191003C940T Panel Switch, the perfect solution for all your switching needs. With its sleek design and reliable performance, this pushbutton switch is a must-have for any electrical project.
Key Features
- Electrical Functions: Normally Open (NO)
- Bushing Actuator Configurations: Curved Actuator
- Bushing Actuator Materials: Stainless Steel
- Contact Materials: Brass (Silver-Plated)
- Case: Short
- Sealing: IP65
- Terminals: Screw
Specifications
Distinctive Features:
- Momentary (NO)
- Impact resistance IK08 for model
- 19 mm (.748) and IK10 for model
- 22 mm (.866)
- Stainless steel actuator and bushing
- UL-CSA approved (long case only)
General Specifications:
- Torque : 1.5 Nm min.- 4 Nm max. applied to nut
- Panel thickness : 1 (.039) to 11 mm (.433) max.
- Low level or mechanical life : 1,000,000 cycles
- Hand soldering : 300 °C, 3 sec. max.
- Panel cut-out : Ø 19.2 mm (.755) or Ø 22.2 mm (.874)
- Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181)
Environmental Specifications:
- Operating temperature : -30 °C to +70 °C
Electrical Specifications:
- Max. current/voltage rating with resistive load :- A contacts : 4 A 12 VDC, 500,000 cycles- C contacts : 2 A 48 VDC, 10,000 cycles
- Initial contact resistance : 50 mΩ max.
- Insulation resistance : 1,000 MΩ min. at 500 VDC
- Dielectric strength : 2,000 Vrms 50 Hz min. between terminals and frame 2,000 Vrms 50 Hz min. between terminals
Added to Your Cart