AV191003C240T
Introducing the AV191003C240T Panel Switch, the perfect solution for all your pushbutton switch needs. With its sleek design and reliable performance, this switch is sure to meet your expectations. The brass silverplated contacts ensure excellent conductivity and durability, while the solder lug quick connect terminals offer easy installation. Upgrade your control panel with the AV191003C240T today!
Key Features
- Electrical Functions: Normally Open (NO)
- Bushing Actuator Configurations: Curved Actuator
- Bushing Actuator Materials: Stainless Steel
- Contact Materials: Brass (Silver-Plated)
- Case: Short
- Sealing: IP65
- Terminals: Solder Lug Quick Connect
Specifications
Distinctive Features:
- Momentary (NO)
- Impact resistance IK08 for model
- 19 mm (.748) and IK10 for model
- 22 mm (.866)
- Stainless steel actuator and bushing
- UL-CSA approved (long case only)
General Specifications:
- Torque : 1.5 Nm min.- 4 Nm max. applied to nut
- Panel thickness : 1 (.039) to 11 mm (.433) max.
- Low level or mechanical life : 1,000,000 cycles
- Hand soldering : 300 °C, 3 sec. max.
- Panel cut-out : Ø 19.2 mm (.755) or Ø 22.2 mm (.874)
- Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181)
Environmental Specifications:
- Operating temperature : -30 °C to +70 °C
Electrical Specifications:
- Max. current/voltage rating with resistive load :- A contacts : 4 A 12 VDC, 500,000 cycles- C contacts : 2 A 48 VDC, 10,000 cycles
- Initial contact resistance : 50 mΩ max.
- Insulation resistance : 1,000 MΩ min. at 500 VDC
- Dielectric strength : 2,000 Vrms 50 Hz min. between terminals and frame 2,000 Vrms 50 Hz min. between terminals
Added to Your Cart