AV031003C240N
The AV031003C240N Panel Switch is the perfect solution for all your pushbutton switch needs. With its sleek and durable design, this switch is built to last. The brass silverplated contacts ensure reliable and efficient performance, while the solder lug quick connect terminals make installation a breeze. Whether you need it for industrial or commercial use, this switch is sure to meet all your requirements.
Key Features
- Electrical Functions: Normally Open (NO)
- Bushing Actuator Configurations: Flat Actuator
- Bushing Actuator Materials: Stainless Steel
- Contact Materials: Brass (Silver-Plated)
- Case: Short
- Sealing: Unsealed
- Terminals: Solder Lug Quick Connect
Specifications
Distinctive Features:
- Momentary (NO)
- Impact resistance IK08 for model
- 19 mm (.748) and IK10 for model
- 22 mm (.866)
- Stainless steel actuator and bushing
- UL-CSA approved (long case only)
General Specifications:
- Torque : 1.5 Nm min.- 4 Nm max. applied to nut
- Panel thickness : 1 (.039) to 11 mm (.433) max.
- Low level or mechanical life : 1,000,000 cycles
- Hand soldering : 300 °C, 3 sec. max.
- Panel cut-out : Ø 19.2 mm (.755) or Ø 22.2 mm (.874)
- Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181)
Environmental Specifications:
- Operating temperature : -30 °C to +70 °C
Electrical Specifications:
- Max. current/voltage rating with resistive load :- A contacts : 4 A 12 VDC, 500,000 cycles- C contacts : 2 A 48 VDC, 10,000 cycles
- Initial contact resistance : 50 mΩ max.
- Insulation resistance : 1,000 MΩ min. at 500 VDC
- Dielectric strength : 2,000 Vrms 50 Hz min. between terminals and frame 2,000 Vrms 50 Hz min. between terminals
Added to Your Cart