These washable miniature toggle switches with insulated threaded bushing are especially designed for flow soldering at 260 °C during 5 seconds owing to high temperature polymer parts.
- Model: Standard
- Levers: Long , insulated lever
- Series: SF
- Terminals: Solder lug terminals
- Insulating cap: P/N U270 For lever 00 only
- Number of poles: Single pole
- Electrical functions: ON OFF MOM
- Contact and terminal materials: Silver
- Mechanical strength : Terminals are strengthened by a bracket or a ground plate ensuring the rigidity of the switch on the board. Actuator strength is 10 N max.
- Iron soldering : 300 °C (572 °F) 5 sec. max.
- Max. torque : 0.25 Nm (.184 Ft.lb)
- Max. panel thickness : 2.5 mm (.098) with 2 nuts, 4 mm (.157) with 1 nut
- Operating temperature : -20 °C to +85 °C (-4 °F to +185 °F)
- Storage temperature : -40 °C to +85 °C (-40 °F to +185 °F)
- Moisture : The insulating materials employed and the complete seal permit the switches to withstand a 56 days moisture test (IEC 68-2-3).
- Solderability : The switches are tested at 235 °C ( 455 °F) according to IEC 68-2-20 after accelerated aging.
- Max. current/voltage rating with resistive load :- silver contacts (A) : 4 A 30 VDC- gold plated brass contacts (CD) : 0.4 VA 20 VAC or DC- gold plated silver contacts (AD) : 4 A 30 VDC (300 mA 30 VDC for gold plating)
- Initial contact resistance : 10 mΩ max.
- Insulation resistance : 1,000 MΩ min.
- Dielectric strength : 1,000 Vrms 50 Hz min.
- Case and cover : UL94-VO, polyamide, glass filled or PES
- Actuator : brass, nickel plated
- ContactsCD : brass, gold platedA : silverAD : silver, gold plated
- Terminal seal : epoxy
Added to Your Cart