SP45Y01027730
Single and double pole momentary pushbutton switches with silver or gold plated contacts. Panel or PC mount, rated up to 1 amp, UL models available.
Key Features
-
Series:
SP
-
Plungers:
Short
-
Termianls:
Straight PC and bracket mounting
-
Caps mounted:
Ø 9,4 (.370)
-
Number of poles:
Double pole
-
Options approval:
Threaded bushing
-
Electrical function:
ON - MOM
-
Contact and terminal materials:
Silver
GET DATASHEET
Specifications
General Specifications:
- Torque : 0.25 Nm (.18 Ft.lb) applied to nut (threaded bushing)
- Total travel : 0.50 mm (.019)
- Soldering - thermal shock (plain bushing models only) : switches are especially designed for flow soldering at 260 °C during 5 seconds owing to high temperature polymer parts.
- Iron soldering (threaded bushing models) : 300 °C max., 5 seconds max.
- Solderability : tested at 235 °C according to IEC 68-2-20 after accelerated aging.
Environmental Specifications:
- Operating temperature : -20 °C to +85 °C
- Storage temperature : -40 °C to +85 °C
- Moisture : insulating materials employed and complete seal permit the switches to withstand a 56 days moisture test (IEC 68-2-3).
Electrical Specifications:
- Max. current/voltage rating with resistive load : - gold plated brass contacts : 100 mA 30 VDC- silver or gold plated silver contacts : 1 A 30 VDC
- Initial contact resistance : 50 mΩ max.
- Insulation resistance : 1,000 MΩ min.
- Dielectric strength : 1,000 Vrms 50 Hz min.
- Electrical life : 60,000 cycles
Materials:
- Case and cover : UL94-V0, polyamide, glass filled or PES
- Actuator : polyamide, glass filled
- Contacts 0 : brass, gold plated 1 : silver 2 : silver, gold plated
- Terminal seal : epoxy
Mechanical Specifications:
- Mechanical strength : Terminals are strengthened by a bracket or a ground plate ensuring the rigidity of the switch on the board. Actuator strength is 10 N max.