SY239CD-7
Introducing the SY239CD-7 Panel Switch, the perfect solution for all your toggling needs. With its sturdy bracket mounting, this switch is designed to withstand even the toughest conditions. Its single pole configuration ensures efficient electrical functions, allowing for seamless ON OFF ON operations. And with its short standard levers, you can easily toggle between different settings. Upgrade your panel with the SY239CD-7 today and experience reliable and convenient switching.
Key Features
- Number Of Poles: Single Pole
- Electrical Functions: ON OFF ON
- Contact Materials: Brass (Gold-Plated)
- Levers: Short Standard
- Terminal Spacing: 4.7mm (0.185) or 3.81mm (0.150)
- Terminals: Bracket Mounting
Specifications
Distinctive Features:
- Process sealed
- Front and rear sealing
- Process compatible
- Wave solderable
- Washable
General Specifications:
- Mechanical strength : Terminals are strengthened by a bracket or a ground plate ensuring the rigidity of the switch on the board. Actuator strength is 10N max.
- Soldering - thermal shock (S series only) : The switches are especially designed for flow soldering at 260°C during 5 seconds owing to high temperature polymer parts.
- Iron soldering (SF series) : 300°C 5 sec. max.
- Solderability : The switches are tested at 235°C according to IEC 68-2-20 after accelerated aging.
Environmental Specifications:
- Operating temperature : -20°C to +85°C
- Storage temperature : -40°C to +85°C
- Moisture : The insulating materials employed and the complete seal permit the switches to withstand a 56 days moisture test (IEC 68-2-3).
Electrical Specifications:
- Max. current/voltage rating with resistive load :- silver contacts (A or 1) : 4A 30VDC- gold plated brass contacts (CD or 0) : 0,4VA 20VAC or DC- gold plated silver contacts (AD or 2) : 4A 30VDC (300mA 30VDC for gold plating)
- Initial contact resistance : 10 mΩ max.
- Insulation resistance : 1.000 MΩ min.
- Dielectric strength : 1.000 Vrms 50 Hz min.
Added to Your Cart