12258-038X778
Der 12258-038X778 Panel Switch ist ein vielseitiger und zuverlässiger Hebelschalter. Mit seinen drei Stangen bietet er eine hervorragende elektrische Funktionalität für verschiedene Anwendungen. Egal ob Sie etwas ein- oder ausschalten möchten oder eine momentane Funktion benötigen, dieser Schalter erfüllt Ihre Anforderungen. Das Design mit Standardhebel ermöglicht eine einfache und komfortable Bedienung. Verbessern Sie Ihr elektrisches System mit dem 12258-038X778 Panel Switch und erleben Sie eine nahtlose Kontrolle wie nie zuvor.
Wesentliche Merkmale
- Zulassungen: Keine Genehmigung der Agentur erforderlich.
- Anzahl der Stangen: Dreipolig
- Elektrische Funktionen: ON OFF MOM
- Fluoreszierende Spitze: Weißer Leuchtstoffstift zum Hebel
- Hebel: Standard
- Klemmen und Buchse: Reiner PC
Spezifikationen
Unterscheidungsmerkmale:
- CECC-Zulassung – entspricht MIL-Spezifikationen
- Äußerst zuverlässige Kontakte
- Stifthebel
- Doppelwandiges Gehäuse für hohe mechanische Festigkeit und
- hohe elektrische Isolierung
- Kompakte Größe
Allgemeine Spezifikation:
- Anzugsdrehmoment: max. 1,5Nm (1.10 Ft.lb) an Mutter angreifend
- Plattenstärke: 8mm (.314) max. - 3mm (.118) min.
- Elektrische Lebensdauer:- Bei 4A 28VDC :20.000 Zyklen (10.000 für Funktionen 5, 4-1R, 4-2R)- bei Niederspannung (50mV 10mA) :150.000 Zyklen (Schalter mit 2 Dauerstellungen)100.000 Zyklen (Schalter mit 3 Dauerstellungen)50.000 Zyklen (tastende Funktionen 7, 8, 4-1R, 4-2R, 5)
Umgebungsbedingungen:
- Schlagfestigkeit: 50g - 11ms (IEC 68-2-27)
- Vibrationsfestigkeit: 10-500 Hz - 10g (IEC68-2-6)
- Betriebstemperatur: -40°C bis +85°C
- Luftfeuchtigkeit: 56 Tage, 93 % R.H., 40°C (IEC 68-2-3)
- Salznebel: 96 Stunden (IEC 68-2-11)
- Frontplattenabdichtung durch 2 O-Ringe, Flache Buchse zur präzisen Ausrichtung
- Plattenabdichtung widersteht 1bar Druck, auch wenn der Schalter betätigt wird
- Epoxidharz abgedichtete Anschlüsse
- Spritzgeschütztes Gehäuse
Elektronische Spezifikationen:
- Max. current/voltage rating with resistive load : 4A 28VDC
- Minimum load : 10mA 50mV, 10μA 5VDC
- Initial contact resistance : 10 mΩ max.
- Insulation resistance : 1.000 MΩ min. at 500VDC
- Dielectric strength :1.000 Vrms 50 Hz min. between terminals2.000 Vrms 50 Hz min. between poles
- Contact bounce : 2 ms max.
- Max. Schaltleistung bei ohmscher Last: 4A 28VDC
- Minimallast: 10mA 50mV, 10μA 5VDC
- Übergangswiderstand: 10mΩ max. (Anfangswert)
- Isolationswiderstand: min. 1GΩ bei 500VDC
- Spannungsfestigkeit:1.000Veff (50Hz zwischen den Anschlüssen)2.000Veff (50Hz zwischen den Polen)
Added to Your Cart