12248-038-1VX778CECC
The 12248-038-1VX778CECC Panel Switch is equipped with straight PC terminals and terminals and bushings for efficient electrical connections. With a double pole configuration, it provides reliable and secure electrical functions, including ON, OFF, and MOM (momentary) operations. The switch features levers that allow for easy operation and control, with one locked position ensuring stability and preventing accidental toggling.
Key Features
- X778: High performance fully sealed black switches
- Levers: 1 locked position
- Approval: CECC 96201-005 and CECC 96201-008
- Fluorescent Tip: White fluorescenttip
- Number Of Poles: Double pole
- Electrical Functions: ON OFF MOM
- Terminals And Bushings: Straight PC terminals
Specifications
General Specifications:
- Anzugsdrehmoment: max. 1,5Nm (1.10 Ft.lb) an Mutter angreifend
- Plattenstärke: 8mm (.314) max. - 3mm (.118) min.
- Elektrische Lebensdauer:- Bei 4A 28VDC :20.000 Zyklen (10.000 für Funktionen 5, 4-1R, 4-2R)- bei Niederspannung (50mV 10mA) :150.000 Zyklen (Schalter mit 2 Dauerstellungen)100.000 Zyklen (Schalter mit 3 Dauerstellungen)50.000 Zyklen (tastende Funktionen 7, 8, 4-1R, 4-2R, 5)
Environmental Specifications:
- Schlagfestigkeit: 50g - 11ms (IEC 68-2-27)
- Vibrationsfestigkeit: 10-500 Hz - 10g (IEC68-2-6)
- Betriebstemperatur: -40°C bis +85°C
- Luftfeuchtigkeit: 56 Tage, 93 % R.H., 40°C (IEC 68-2-3)
- Salznebel: 96 Stunden (IEC 68-2-11)
- Frontplattenabdichtung durch 2 O-Ringe, Flache Buchse zur präzisen Ausrichtung
- Plattenabdichtung widersteht 1bar Druck, auch wenn der Schalter betätigt wird
- Epoxidharz abgedichtete Anschlüsse
- Spritzgeschütztes Gehäuse
Electrical Specifications:
- Max. current/voltage rating with resistive load : 4A 28VDC
- Minimum load : 10mA 50mV, 10μA 5VDC
- Initial contact resistance : 10 mΩ max.
- Insulation resistance : 1.000 MΩ min. at 500VDC
- Dielectric strength :1.000 Vrms 50 Hz min. between terminals2.000 Vrms 50 Hz min. between poles
- Contact bounce : 2 ms max.
- Max. Schaltleistung bei ohmscher Last: 4A 28VDC
- Minimallast: 10mA 50mV, 10μA 5VDC
- Übergangswiderstand: 10mΩ max. (Anfangswert)
- Isolationswiderstand: min. 1GΩ bei 500VDC
- Spannungsfestigkeit:1.000Veff (50Hz zwischen den Anschlüssen)2.000Veff (50Hz zwischen den Polen)
Added to Your Cart